June 11, 2012
The Kyoto University together with research group of Professor Hideo Ohno of Center for Spintronics Integrated Systems and Research Institute of Electrical Communication of Tohoku University and NEC Corporation (NEC) demonstrated the world’s first three-terminal spintronics device that is as highly reliable as existing semiconductor technologies. They optimized a structure of nanometer-sized magnetic film and achieved
- 1. sufficient operation stability and high endurance and
- 2. availability under a broad range of environments such as temperature and magnetic field.
In addition, they confirmed
- 3. 10-years' non-volatile data retention at a temperature of 150 degrees Celsius, which is a common specification for automobile application.
In system-LSI, which is a core device of digital equipment, considerable increase in standby power has grown into a serious problem in recent years. The obtained results show that the developed technology can provide a new value of "zero standby power" to the system-LSI without degrading the reliability or convenience of existing technology. With this device technology, the developments toward practical use are expected to be accelerated.
Background
System-LSI has for decades played a principal role in enhancing the performance of digital electronics equipment such as personal computers and mobile phones. However, large obstacles stand in the way of further progress; the biggest one is an increase in consumption power during standby. Recently, spintronics technologies have attracted a great deal of attention as a candidate to solve this problem. Spintronics elements can retain the data, i.e. nonvolatile, resulting in zero standby power because they utilize a magnetic property for data storage, whereas semiconductor memory cells which are used in the existing system-LSI miss the stored data when the power was cut off, i.e. volatile. These spintronics elements are categorized into two-terminal and three-terminal types. The three-terminal spintronics element is suitable for a high-speed memory and nonvolatile element in high-speed logic circuit because write and read current paths differ from each other.
Current-induced domain wall motion, which has gathered considerable attention as a novel technology in spintronics, is a phenomenon in which a magnetic polarity can be reversed by introducing a current into the fine magnet itself. It is easily applied to the above three-terminal spintronics element, and the element using it can adapt to the leading edge LSI generation due to the excellent scalability. In the previous research and development, basic operation of a memory device has been demonstrated in the three-terminal element with current-induced domain wall motion.
Figure 1: Schematic diagram of current-induced domain wall motion. When a current passes through a magnetic domain wall, it moves the domain wall in the electron flow direction. It is attractive as a manipulation way of magnetic polarity of fine magnet.
Figure 2: Structure of three-terminal spintronics cell. High speed and reliable operation are possible since the current paths are different for writing and reading. Current-induced domain wall motion (Fig. 1) can be applied as a writing method.
Research issue
The spintronics device can provide a new value of "zero standby power" with high-speed operation, which is impossible for existing semiconductor technologies as mentioned above. On the other hand, for practical use in the market of system-LSI, the reliability and convenience of existing technology must not be degraded. For example,
- 1. operation stability and endurance in the existing semiconductor device are high enough to be used for 10 years, and equivalent features are required in the spintronics device.
Similarly,
- 2. the spintronics device has to operate normally under a broad range of temperatures and magnetic field environments in which the existing semiconductor devices have been used.
In addition to them,
- 3. it should be demonstrated that the element has 10-years' retention property without power supply, which is impossible in existing technology.
Then, the practical use of the spintronics element becomes a real possibility.
Technical method and achievement
A group consisting of Kyoto University, Tohoku University, and NEC investigated in detail the stack structure of a nanometer-sized magnetic film composed of cobalt and nickel that acts as information storage in the present current-induced domain wall motion device. Then, they demonstrated that the integrated device with the developed film can provide the new value of nonvolatility, which is a unique feature of the spintronics element, while maintaining characteristics equivalent to the existing semiconductor technologies, as described below:
First,
- 1. sufficiently high stability of operation and endurance required for the three-terminal device were confirmed.
Then,
- 2. no variation in the writing characteristics was observed under an external temperature of minus 200 - 150 degrees Celsius and external magnetic field of ±50 Oersted.
In addition,
- 3. it was confirmed that the developed element has 10-years' retention property under a temperature of as high as 150 degrees Celsius; this is the highest temperature required for the LSI devices for automobile application.
This is the first time these three requirements have been satisfied simultaneously. Furthermore, they also confirmed these properties in a prototype chip where the spintronics elements were formed on an integrated circuit.
Figure 3: Repeat write and read test results of an element in prototype chip, indicating stable operation and high endurance.
Significance of research
The high reliability of the three-terminal device elucidated here can diminish a load of circuit system such as error correction and accordingly the way to an application of spintronics logic circuit was opened.
A portion of these results were produced by "Research and Development of Less Power consumption logic integrated circuits", (Headed by Prof. Hideo Ohno at Tohoku University), an advanced research and development program funded by the Cabinet Office.
Notes
Nonvolatile element in high-speed logic circuit
A temporal storage circuit is connected to a logic circuit that processes information in LSI. The representative example is a flip-flop device. If this circuit become nonvolatile, it will be possible to drastically reduce the consumption power by controlling the power supply frequently.
Current-induced domain wall motion
Magnetic properties of magnets originate from a magnetic moment of electron. When one looks at the inside of the magnets microscopically, there are a number of domains where the moments are aligned in one direction, called magnetic domains. The boundary region of the two magnetic domains with a moment pointing different directions is called the magnetic domain wall. Current-induced domain wall motion is a phenomenon in which the magnetic domain wall is displaced in an opposite direction to the current, i.e. same direction to electron flow when current passes through the domain wall. It was theoretically predicted by L Berger in 1978, and experimentally demonstrated for the first time by research groups of Professor Teruo Ono of Kyoto University and of Professor Hideo Ohno of Tohoku University in 2004.
Scalability
Scalability is the ability to enhance a property with reducing device size. LSI technology has had its performance enhanced for several decades due to its good scalability, but it is beginning to face physical limits.
Oersted (abbreviated as Oe)
Oersted is the unit of magnetic field. 1 Oe is defined as a magnetic field strength at a position of 1-cm-away from a magnetic pole of 1 emu/cm, or that in the center of closed circuit with a radius of 1 cm and carrying a current of 1/2π A. The magnetic field generated from geomagnetism is about 0.5 Oe.
Contact
Associate Professor Dr. Chiba Daichi
Institute for Chemical Research, Kyoto University